The full fiber Pit resistance furnace

Fiber Well resistance furnace lining preclude the use of new high-purity thrown silk carpet made through special processing, the temperature is controlled by the upper and lower partition of PID intelligent automatic control, can be programmed according to the workpiece process warming. The insulation curve tracking the lid lifting according to the severity of manually. Electric actuator. Applicable alloy ring. Flanges. Wire rod for high temperature through the heat. Normalizing. Quenched. Annealed. You can also quenching multi-purpose.
Fiber Pit resistance furnace uses:
Fiber Well resistance furnace is mainly used for shaft hardening, normalizing, uniform heating temperature, the amount of deformation of the workpiece. Load-bearing refractory brick structure, the oversize carbon steel parts tempering average temperature heat treatment.
Fiber Pit resistance furnace advantages:
1, the full fiber Pit resistance furnace has a large fan device, increasing the furnace temperature uniformity; (optional)
2, all-fiber Well resistance furnace of the multi-zone control, further improve temperature uniformity;
Furnace with stainless steel air guide barrel; (optional)
4, the lid opening and closing driving lifting or automatic hydraulic opening and closing mechanism, with the guide posts to ensure the lid open and close smoothly; (or lid boot device: hydraulic cylinders and hydraulic machinery lid open from the middle to both sides .)
5, the lid and the furnace temperature resistant fibers cotton production, the furnace insulation performance, save energy and reduce production costs;
6, no pollution, environmental benefits.